INDEX

• 2018.a Version
  • Generic material columns
    • Definition of the material
    • Generic sections
    • Sections defined using an equivalent rectangle
  • Concrete columns with generic sections
    • Introduction
    • Layout of the longitudinal reinforcement
    • Column schedule
  • Join the longitudinal reinforcement of a column start to the reinforcement of the first span
  • Column force visualisation improvements
  • Reading of walls and partitions of the BIM model
  • Deflection limits of joists depending on their material
  • Take-off report
  • Project comments
    
    
• 2018.c Version
  • Snap to post-tensioned tendon ends
  • Link project to BIM model
  • Punching shear check report
  • Snap to polygons in generic column sections
    
    
• 2018.d Version
  • Shells in "Integrated 3D Structures of CYPECAD"
    
    
• 2018.f Version
  • Introduction of walls on other walls
  • Composite slabs with collaborating steel sheets from the manufacturers: ACESCO and CORPACERO
    
    
• 2018.g Version
  • Divide alignment
  • Column editor
  • Grouping of footings in the footings schedule
  • Elevation difference at wall starts
  • Project data report tables
    
    
• 2018.h Version
  • Recreate beams upon introducing or moving columns
    
    
• 2018.i Version
  • Interpreting the columns of the BIM model
    • Generating the columns of the BIM model
    • Updating the columns of the BIM model
    • New column (BIM)
  • Managing the templates of the BIM model
  • Template visibility upon opening the project
  • Grouping frames in frame drawings
  • New types of cold-formed steel for the EAE 2011 code and Eurocodes 3 and 4
    
    
• 2018.j Version
  • Selection of BIM model files to import
    
    
• 2018.k Version
  • Access to “Wall forces” from the reinforcement editing window
  • Block reinforced concrete wall reinforcement
  • Compatibility of the NTC 2017 (Mexico D.F.) concrete code with the CF 2015 and CF 2008 earthquake codes of Mexico
  • New types of steel for the AISI S100:2007 cold-formed steel code
    
    
• 2018.l Version
  • Template updates using the F2 key
    
    
• More new features

More new features

• New modules and programs
  • Structures
    • Generic material and generic section supports, and reinforced concrete supports with generic sections (CYPECAD module) (2018.a)
    • OpenSees analysis engine (for StruBIM programs) (2018.a)
    • StruBIM Deep Beams (only at BIMserver.center) (2018.g)
    • StruBIM Embedded Walls (only at BIMserver.center) (2018.i)
      
      
  • MEP
    • CYPELEC Core (only at BIMserver.center) (2018.j)
    • CYPELEC Multiline (only at BIMserver.center) (2018.k)
    • CYPELEC Networks (only at BIMserver.center) (2018.a)
    • CYPETEL Wireless (only at BIMserver.center) (2018.j)
    • CYPEPLUMBING Sanitary systems (2018.a)
    • CYPEPLUMBING Water systems (2018.f)
    • CYPEPLUMBING Schematic diagrams (2018.l)
    • CYPEGAS (2018.a)
    • CYPEFIRE Design (only at BIMserver.center) (2018.c)
      
      
  • CYPETHERM
    • TOSHIBA Multi-Split Systems (2018.a) and TOSHIBA 1x1 Split Systems (2018.b)
      
      
• New features and improvements
  • BIMserver.center
  • Open BIM complement for Revit
  • Code implementation and improvements in its application
  • IFC Builder
  • CYPECAD
  • CYPE 3D
  • Portal frame generator
  • CYPE-Connect
  • StruBIM Analysis
  • StruBIM Design
  • StruBIM Foundations
  • CYPECAD MEP
  • CYPELEC Core
  • CYPELEC Multiline
  • CYPELEC Networks
  • CYPETEL Wirwless
  • CYPEPLUMBING Sanitary Systems
  • CYPEPLUMBING Water Systems
  • CYPELUX
  • CYPELUX LEED
  • CYPESOUND
  • AcoubatBIM by CYPE
  • CYPEFIRE Design
  • CYPEFIRE Sprinklers
  • CYPETHERM Imporvements
  • CYPETHERM LOADS
  • CYPETHERM EPlus
  • CYPETHERM HVAC
  • Arquimedes
    
    
• New features of the 2018 version (displayed per version)
  • 2018.l Version (8th May 2018)
  • 2018.k Version (3rd April 2018)
  • 2018.j Version (28th February 2018)
  • 2018.i Version (7th February 2018)
  • 2018.h Version (29th December 2017)
  • 2018.g Version (28th November 2017)
  • 2018.f Version (27th October 2017)
  • 2018.e Version (26th September 2017)
  • 2018.d Version (8th August 2017)
  • 2018.c Version (25th July 2017)
  • 2018.b Version (30th June 2017)
  • 2018.a Version (14th June 2017)
    
    
• New features of the Previous versions
  
  • 2017 version
  • 2016 version
  • 2015 version
  • 2014 version
  • 2013 version
  • 2012 version